• 0 Posts
  • 13 Comments
Joined 1 year ago
cake
Cake day: July 20th, 2023

help-circle


  • Dremor@lemmy.worldtoSelfhosted@lemmy.worldHelp me build a home server
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    2
    ·
    6 months ago

    The budget is way too low imo.

    You could repurpose an old workstation, bought dirt cheap on eBay if you are lucky, but even then you’ll have to get yourself an HDD, maybe multiple of them if you want to have data redundancy.

    For anything new your best bet is a 2 bay ready made NAS, but you’ll have to invest around 300€ for the cheapest one.







  • Both Anker and Ugreen does good GAN chargers, but Anker is bad at doing good cables (2 of 3 usbc to usbc cable failed during the first year of use). I only had 1 cable from Ugreen, and I don’t use it often, so I can’t tell if they are good yet.

    Other than that I don’t have much to say about small electronics, except maybe avoid Asus Laptops. Got 3 of them during my lifetime, all got pretty big problems, ranging from bad screens to dead touchpad and motherboards. They even forgot to connect the internal audio cable during the motherboard replacement, had to sent it back a second time 😅.





    • My first TrueNAS homelab was based on an Athlon 3000G and 16GB of RAM. And I ran Nextcloud, Home Assistant, and multiple other services with globaly no ptoblem. Your configuration should be OK.
    • It’d be easier to stick to Truecharts. But I can’t tell for community plugins, never tried them.
    • Do not use that 1To SSD as boot drive, it won’t improve anything over the 250GB SSD. Use the later, maybe buy a second one to make it redundant. Then use the 1 TB SSD for an Apps pool, and the HDD as a single RaidZ2 array for all your important datas.