Refurbished drive. I’ve had 4 white label drives running for a number of years without issue, planning on eventually getting 12 more and maxing out my servers.
Unfortunately that’s years down the line :(

Throwing in my own data, I have a small server rack at home that runs a brocade icx4630 switch and dell r720, idles around 250w. My desktop setup, monitors, amp, computer itself etc idles around 200w.

Make your stranded end nice and long and easy to “comb” and flatten out. Get all your pairs lined up and in order and flatten the wires together on a table or other work surface.

I usually cut about 3 or so inches of sleeve off the cable to expose the strands. But same thing applies if you can only cut an inch off, just a little more difficult.

Assuming you have passthrough rj45 ends or whatever they’re called, you can just slip on your end and crimp and let the tool trim the excess wire.

If you don’t you get to go through the process of trimming down and getting the tiny stubs to stay together enough to slide into the connector.

Example from eBay listing

I’m currently hosting vaultwarden on my rack, mostly just because I can really. It’s easy enough and I have plenty of resources.