Obligatory “Fuck Rachel”. At least Khun is on to her.
Obligatory “Fuck Rachel”. At least Khun is on to her.
Thanks for the tip! I took a look and it seems like Recognize uses this: https://github.com/jordipons/musicnn
Last update was 4 years ago but will give it a try this weekend.
I’m thinking of Ripping my CD collection again. I’m researching a way to use a LLM to tidy up the metadata.
If you ever figure out how to use AI to determine the genre(s) of a song, let me know. Have been looking for something like that for quite a while.
Yes, season 7 is currently running and has 10 more episodes remaining.
I don’t think you can import pfSense configurations into OPNsense. I switched from a DIY pfSense box as well and redid the config.
You can look for a converter or install pfSense onto it though.
Because it’s dope.
Also, according to their website the 10 and 25 Gbit/s packages cost the same per month.
Also, still cheaper than my 1 Gbit/s connection.
They are expensive but I run a OPNsense DEC740 and have no issues with my Gigabit fiber, even without modem and the PPPoE overhead.
You can still try playing with hardware offload on/off and if you use PPPoE, it runs on a single core by default.
I really liked the first season, a much darker take on the usual cutesy anthropomorphic animal world.
Not a huge fan of season two, felt really rushed. It had some great episodes and I’m definitely checking out the next season but I felt disappointed after the strong first season.
I don’t think any of my devices are using more than 2x2 either, that is just the maximum of the access points.
The speeds I get are on a Fairphone 5 with 2x2, at most a room with drywalls away.
ufotable once again delivering the full movie experience in a TV show episode. The animation and music were absolutely gorgeous.
I get 700/500 on my Unifi U6 Enterprise (4x4 MIMO, 80 MHz, 5 GHz) and 500/500 on my Unifi AC Pro (3x3 MIMO, 80 MHz, 5 GHz).
Could probably get some more on 6 GHz but I never was able to get it to work properly.
Off the top of my head, why did you set the prefix to 0x1? I was under the impression that it only needs to be set if there are multiple vlans
I have multiple VLANs, 0x1 is my LAN and 0x10 is my DMZ for example. I then get IP addresses abcd:abcd:a01::abcd in my LAN and abcd:abcd:a10::bcdf in my DMZ.
However, I get a /56 from my ISP wich gets subnetted into /64. I heard it’s not ideal to subnet a /64 but you might want to double check what you really got.
what are your rules for the WAN side of the firewall?
Only IPv4 + IPv6 ICMP, the normal NAT rules for IPv4 and the same rules for IPv6 but as regular rule instead of NAT rule.
My LAN interface is only getting an LLA so maybe it’s being blocked from communicating with the ISP router.
If you enable DHCPv6 in your network your firewall should be the one to hand out IP addresses, your ISP assigns your OPNsense the prefix and your OPNsense then subnets them into smaller chunks for your internal networks.
It is possible to do it without DHCPv6 but I didn’t read into it yet since DHCPv6 does exactly what I want it to do.
I’m no expert on IPv6 but here’s how I did it on my OPNsense box:
WAN
interface (probably already done)LAN
interface, use Track interface
on IPv6, track the WAN
interface and choose a prefix ID like 0x1
::eeee
to ::ffff
, you don’t have to type the full IP)Advertisments
to Managed
and Priority
to High
After that your DHCP server should serve public IPv6 addresses inside of your prefix and clients should be able to connect to the internet.
A few notes:
Season 2 has one of my favorite ending scenes: https://www.youtube.com/watch?v=VWR_hTC4A98 (Spoilers for S02E07)
Really a great show.
Do a library rescan on your music library and then download the latest Finamp beta from here: https://github.com/jmshrv/finamp/releases
Lyrics should work then:
Is he such a bad writer or what’s the problem?
Check out Picard, I switched to it when I switched to Linux: https://flathub.org/apps/org.musicbrainz.Picard
I don’t run Pi-hole but quickly peeking into the container (docker run -it --rm --entrypoint /bin/sh pihole/pihole:latest
) the folder and files belong to root with the permissions being 755
for the folder and 644
for the files.
chmod 700
most likely killed Pi-hole because a service that is not running as root will be accessing those config files and you removed their read access.
Also, I’m with the guys above. Never chmod 777
anything, period. In 99.9% of cases there’s a better way.
They have a different architecture so it comes down to preference.
Docker runs a daemon that you talk to to deploy your services. podman does not have a daemon, you either directly use the podman command to deploy services or use systemd to integrate them into your system.
I have exactly the setup you described, a Raspberry Pi with an 8 TB SSD parked at a friend of mine. It connects to my network via Wireguard automatically and just sits there until one of my hosts running Duplicati starts to sync the encrypted backups to it.
Has been running for 2 years now with no issues.