• 2 Posts
  • 17 Comments
Joined 1 year ago
cake
Cake day: July 7th, 2023

help-circle








  • Thanks for throwing me down a rabbit hole lol, I learned so much today. I spent a good chunk of the day researching this stuff, and found a couple of options. Came across these HP NC522SFP 10Gb NICs, someone selling 2 for under $100. My understanding is I can pair these with the generic DACs at FS.com (thanks for sharing this btw) and any 10Gb SFP switch, and I will be able to get the 10Gb link? And right, a transceiver to get the link from the ISP to the router.

    I still have to do the runs for the second floor and other half of the main, but the basement is done. The whole NAS, HV, router and all that live in the basement, and the main PC will be moving there so would be easy enough to do some fiber runs there, and it’s all short. I think the longest would be 15 feet. Thanks!


  • Hmm that’s true. I’ve been researching used enterprise 10Gb SFP switches after one of the comments and I think that’s the way to go. And yes, in the tests I’ve ran on the ISP router, I get the full advertised speed. Can’t test above 1Gb on the other devices, but even through a VPN it averages 0.9Gb down/up.

    I get it. I’ve actually only recently upgraded to the 3Gb plan because it was only another $5 per month over the 1.5Gb plan I had, so just trying to sort out next steps. Probably should have mentioned that in my post ☺️. I will definitely leave the PCs that are used for browsing/basic gaming/yt on 2.5, no need to change anything there as I doubt they will ever saturate 1Gb. After some of the posts here and more research, I definitely want the NAS and my main PC on 10Gb, and it should only cost a little more than planned. The HV uses a USB 3.0 Ethernet adapter, but I see there are some 5Gb ones available that will double the bandwidth.


  • Oh that’s a good point about the diagram. I just threw these together real quick to help show what I mean. Yes the ISP hardware gives me a 10Gb RJ45. I’ve been researching 10Gb networking today and I think that’s the play. How come you think a managed switch would be a pain? Just from a setup perspective?

    Modem <-> switch <-> wifi router is what I was thinking to do as in my second diagram, with the wifi router handling the DHCP, but now you have me thinking if that makes sense at all.

    So the 5 port switch I have does exactly what you say, but the area is also in a spot where I have easy access and can add a couple more LAN drops in a matter of minutes.

    Good tip, if I add an AP I will definitely wire them together. Thanks!








  • Since none of my devices support 10Gb, that would get real expensive, real fast to add 5 10Gb NICs and a 10Gb switch/router. I was actually looking at the QNAP 2.5Gb switches. There are also some no-name brand unmanaged switches like Mokerlink and Nicgiga, that are well reviewed. Some have 8 x 2.5Gb and 1 or 2 x 10Gb SFP ports. I could have one of those plus a 16 port TP-Link managed switch for about $220 CAD all in, and the HV, NAS and PCs all support 2.5Gb already so no additional expense there.

    Just a question of whether the way I laid it out will work or not.