cross-posted from: https://sh.itjust.works/post/63691946
Looking for advice on setting up a new whole home network and the direction to take of MoCA over existing cabling vs running new Ethernet Cat6A:
Recently in a new space that has an existing HomeConnect CSMAPDU9VPI with coax cables run throughout the home, which seems like a great candidate to just use MoCA and get up and running faster:
But I am also interested in “future proofing” the network setup and replacing the coax cables that are already run with Cat6A Ethernet, all connecting to a central 10G switch / homelab setup.
Is it worth the effort to re-run all of the cables and swap out the wall plates or just go with the simple thing an run with a MoCA setup? I’d really prefer to not spend on one setup with the plan to update in the future, but maybe that’s the compromise solution to get setup and running sooner.
The CSMAPDU9VPI is currently completely isolated from the cable line to the modem (picture above is old and shows a cable connected to the IN port, this cable is no longer connected) so I don’t think I have to worry about interference with my DOCSIS 3.1 service / modem.
I’ve been running MoCA in my home for the last ~5 years and it seems to be doing just fine. Even in my last house with older coax run I was able to get ~1Gbps to my endpoints. The latency difference hasn’t been a problem for me, even with 3-4 adapters in use.
It’s not quite as nice as having cat6 run everywhere, but unless you’re trying to like edit 4K video off a NAS or something that needs a ton of bandwidth it should do just fine.
FWIW, I use these adapters from GoCoax, but there are other good ones out there too: https://www.amazon.com/goCoax-Adapter-Ethernet-Bandwidth-existing/dp/B09RB1QYR9