Finally…FINALLY had time to start moving everything over from my old Mac Mini-based NAS to my “new” NAS.
For reference: https://lemmy.dbzer0.com/post/61180593
So far so good! Ultimately, I decided to start with a fresh install of the most recent OMV release (v8.5), and migrated my existing mdadm-managed RAID5 array to that. OMV picked it up immediately, which made that part very easy.
The tricky part I’m dealing with now is remapping the various shares to my Proxmox cluster and VMs. Because I started fresh, I changed things up a little bit and created a second “disk” for each of my four Proxmox-hosted Docker VMs, which will hold those containers’ user data (not the container itself). The secondary VM disks are hosted inside Proxmox’s own NFS mount from the NAS.
Maybe there’s a better way to map the storage, but honestly I’ve learned an absolute shitton about how to properly set up Linux permissions and service users through this whole process. Plus, if the Mac mini was shut off from a power interruption or whatever, I would still have to manually power-on each disk in its USB-connected enclosure.
Unfortunately, during this migration process, one of my 4TB Reds refused to play nice, and checking the SMART stats showed multiple failing sectors. It has 69k (nice) hours, same as its twin. I had anticipated this, as I bought the first pair of EFRX Reds back in 2018, so about a year or two ago I added a newish 4TB Black as a hot spare (already had it, wasn’t using it for anything else). By the time I found the dying Red, mdadm had already automatically removed the Red from the array, pulled in the spare Black, and rebuilt the array. Fucking awesome. Both legitimately and sarcastically…
Obligatory pics!
Fully assembled:

OS install:

And its original config from HP, right before I tore it apart. Check out that dust blanket:

Full specs:
| Part | Name |
|---|---|
| Case | HP ProLiant ML110 Gen 2 (2004-ish) |
| Motherboard | Asus PRIME Q270M-C mATX |
| CPU | Intel Pentium G4560T |
| Memory | Samsung 1x8GB DDR4-2400 |
| Power Supply | Rosewill Capstone 650W |
| CPU Cooler | Thermalright Assassin X SE |
| Case Fan | Noctua A12x25 120mm |
| Operating System | OpenMediaVault v8.5 |
| OS Drive | Toshiba 128GB M.2 NVME SSD |
| Storage Management | LSI HBA 9211-8i - IT Mode |
| Storage Management | Rosewill 4 x 3.5" HDD Hot-Swap Cage (+fan) |
| RAID5 Storage | WD Red CMR 4TB 3.5" HDD |
| RAID5 Storage | WD Red CMR 4TB 3.5" HDD |
| RAID5 Storage | WD Red CMR 4TB 3.5" HDD |
| RAID5 Storage | WD Black 4TB 3.5" HDD (Hot spare - it’s CMR, too!) |
| RAID5 1:1 Backup | WD Red Plus CMR 8TB 3.5" HDD |
| Camera Storage | WD Purple 1TB 3.5" HDD |


…I dare you to give it a taste test
wheezing tastes like furniture…