I asked this question about a week ago on homelab and didn’t get very much input, so I hope I can get more help here.

I have been looking at replacing my L3 switch at the gateway of my network & the OPNsense DEC850 seems to have all the features I want, mainly, vlans, 10 GB wan, multiple 2.5 GB lan, & open firmware. Does anyone have experience with this router/ are there better routers out there that do similar setups? I have experience with Cisco hardware and am willing to learn new syntax so I am not too worried about the CLI, but I heard that opnsense’s docs are a bit thin.

  • flueterflam@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 day ago

    I was in your exact same position 2-3 weeks ago. Was also considering the OPNsense rack mounted options FWIW.

    I ended up going with Protectli, which some others have mentioned. Specifically, the VP2440e.

    I just finished the setup completely the last few days and have been making tweaks as I run into concerns or preference changes. But the hardware itself is running great. I ran into a hiccup because I bought a bad RAM DIMM externally and had to return and get a new one. I put in a 32GB one for expandability (Running Proxmox with assorted stuff, like OPNsense, AdGuard Home, Tailscale, an NTP server LXC, UniFi OS controller LXC and a few others). I mention this because some of the Protectli devices are very picky with brand AND model of RAM, so take a look for compatibility on their website.

    Anyhow, I got the barebones option and supplied my own RAM and NVMe and it’s working great so far.

    To answer your question about OPNsense DEC850 - when I was researching the general consensus is that their products are just fine, but overpriced and really geared more towards businesses that plan to utilize an ongoing services/support agreement. That’s also partly how OPNsense (the software) remains free for home users who can put it on whatever hardware they choose (sans professional support).

    For my specific setup, I use one RJ45 port directly to the ISP/modem, one SFP+ port to an SFP+ port on my “gateway” switch (not a software gateway, just a physical one where all the traffic goes through to reach the VP2440e), and then another RJ45 port which was a transit link. I’m looking at changing this up and putting the Proxmox containers/VM on a VLAN 99 as an internal network and having the default LAN be 10.x.x.x instead, which (with a fireall rule) would help me eliminate the transit link port need.

    I included a lot because I just went through your exact process/decision-making situation. Protectli appear to be highly praised in the homelab community. But the choice is always yours, of course!

    EDIT: some typos