I’d asked about using a VPS to get better routing to my homelab in this post: https://lemmy.world/post/1424540

I’ve narrowed down my problem- if i use a subdomain in my caddyfile, performance is 1/3 or worse compared to just the root.

example.com {reverse_proxy 192.168.1.57}

will saturate my gigabit lan connection at 980ish. On a 5gUW connection i get my advertised 50 mbit or more

librespeed.example.com {reverse_proxy 192.168.1.57}

I get 220-250 megabits on my internal lan. The same 5gUW connection will only get 7 or 8 mbit.

It’s strange to me that everything seems to work just fine, but it’s just slow. Anyone got any ideas?

    • lemming741@lemmy.worldOPEnglish
      4·
      1 year ago

      I tried to dig into that but couldn’t come up with a good test. But if NAT hairpinning wasn’t working right, I’d be limited to my ISPs 50Mbit, right? I could get 200+ Mbit on wifi. I also tested this from work (50 Mbit sym fiber) and subdomains always were slower. I figured out today it’s HTTP/3 causing my problems. I don’t know if I care to troubleshoot anymore since it’s working great with http 1 & 2.